Composites

All
Gloved hand rolling gray epoxy barrier coat onto the underside of a fiberglass hull on jack stands in a metal boat shed, ahead of bottom paint
By: Boat Suppliers
17 October 2026

Epoxy Barrier Coat Below the Waterline: Coats...

How many coats of epoxy barrier coat a hull needs (4 to 6, about 10 mil dry), the recoat window b...

By: Boat Suppliers
17 October 2026

Epoxy Barrier Coat Below the Waterline: Coats...

How many coats of epoxy barrier coat a hull needs (4 to 6, about 10 mil dry), the recoat window b...

Fiberglass motorhome sidewall with several delamination bulges across a wide area
By: Boat Suppliers
11 October 2026

How Much Epoxy for RV Delamination Repair? Si...

Measure the loose skin, not the bubble, and plan on about 4 fl oz of mixed epoxy per square foot....

By: Boat Suppliers
11 October 2026

How Much Epoxy for RV Delamination Repair? Si...

Measure the loose skin, not the bubble, and plan on about 4 fl oz of mixed epoxy per square foot....

Delaminated fiberglass sidewall on a motorhome, with ripples and bubbles in the skin below the windows
By: Boat Suppliers
11 October 2026

RV Delamination Repair: How to Re-Bond a Side...

A bubbled RV sidewall goes back down with a dry wall, thin epoxy at about 4 fl oz per square foot...

By: Boat Suppliers
11 October 2026

RV Delamination Repair: How to Re-Bond a Side...

A bubbled RV sidewall goes back down with a dry wall, thin epoxy at about 4 fl oz per square foot...

Tapered fiberglass skeg on a sawhorse with frayed glass fibers at the tip, epoxy resin and hardener jugs, mixing cup and 1708 tape roll on the bench
By: Boat Suppliers
06 October 2026

Fiberglass Keel and Skeg Repair: Grind Back, ...

Fiberglass keel repair, step by step: grind a 12:1 taper, rebuild with 1708 biaxial in vinyl este...

By: Boat Suppliers
06 October 2026

Fiberglass Keel and Skeg Repair: Grind Back, ...

Fiberglass keel repair, step by step: grind a 12:1 taper, rebuild with 1708 biaxial in vinyl este...

Clear epoxy resin pouring from a graduated measuring pitcher into a mixing cup on a wood workbench, metal cans and wood shavings nearby
By: Boat Suppliers
05 October 2026

Epoxy Resin Buying Guide: Viscosity, Ratio an...

Epoxy resin buying guide: viscosity for wet-out vs bonding, why mix ratio is not a grade, and whi...

By: Boat Suppliers
05 October 2026

Epoxy Resin Buying Guide: Viscosity, Ratio an...

Epoxy resin buying guide: viscosity for wet-out vs bonding, why mix ratio is not a grade, and whi...

Digital scale weighing clear two-part epoxy in a mixing cup on a shop workbench, with a cartridge gun and open resin can, for checking mix ratios
By: Boat Suppliers
01 October 2026

Two-Part Epoxy: Mix Ratios, Pot Life and Whic...

Two-part epoxy mix ratios by weight and volume, pot life at 72ยฐF for West 105 hardeners and Six10...

By: Boat Suppliers
01 October 2026

Two-Part Epoxy: Mix Ratios, Pot Life and Whic...

Two-part epoxy mix ratios by weight and volume, pot life at 72ยฐF for West 105 hardeners and Six10...

Boat Suppliers epoxy resin and 1:1 hardener bottles with a digital scale, drill paddle mixer and fiberglass cloth, for working out resin per layup
By: Boat Suppliers
28 September 2026

Epoxy Calculator: How Much Resin Your Layup A...

Epoxy calculator math for hand layup: resin per square yard by cloth weight, coverage per gallon,...

By: Boat Suppliers
28 September 2026

Epoxy Calculator: How Much Resin Your Layup A...

Epoxy calculator math for hand layup: resin per square yard by cloth weight, coverage per gallon,...

Gloved hand smoothing fiberglass cloth with a yellow squeegee over wet epoxy on an upturned wooden kayak hull, resin and hardener on the bench
By: Boat Suppliers
25 September 2026

Fiberglass Kayak Build and Repair: Layup Sche...

Fiberglass kayak build and repair specs: cloth weights, CSM vs cloth, the 12:1 scarf for hull rep...

By: Boat Suppliers
25 September 2026

Fiberglass Kayak Build and Repair: Layup Sche...

Fiberglass kayak build and repair specs: cloth weights, CSM vs cloth, the 12:1 scarf for hull rep...

Blue-gloved hand pumping clear epoxy from a resin can into a mixing cup on a woodshop bench, metering resin to pair with 205, 206 or 207 hardener
By: Boat Suppliers
24 September 2026

West System Epoxy: 105 With 205, 206 or 207 a...

West System epoxy hardeners settled: 105 with 205 fast, 206 slow or 207 clear. Pot life, ratio, b...

By: Boat Suppliers
24 September 2026

West System Epoxy: 105 With 205, 206 or 207 a...

West System epoxy hardeners settled: 105 with 205 fast, 206 slow or 207 clear. Pot life, ratio, b...