Mixing Cup

SKU:CON-MM016

Brand Boat Suppliers Part No. LEK02M3A50

$1.49 USD

$1.49 USD ~~$1.99 USD~~

Sale Sold out

Shipping calculated at checkout.

In stock

Size: Pint

Pint 1 Quart 2.5 Quart 5 Quart

Quantity

These graduated mixing cups are for measuring and mixing two-part epoxy, polyester resin, gelcoat, adhesives and paint straight from the scale on the side. Ratio lines for 1:1, 2:1, 3:1, 4:1 and more run beside ounce and milliliter graduations, so you fill to one mark, add to the next and stir, with no math on the bench.

Pint, quart, 2.5 or 5 quart

Pick the size that fits the batch. A pint covers small repair mixes, and the 2.5 and 5 quart cups take larger layup and gelcoat batches. Don't let a large batch of fast epoxy sit in the cup once mixed; it heats as it kicks.

Clear, solvent-resistant polypropylene
Printed ounce, milliliter and ratio graduations
Sizes: pint, quart, 2.5 quart, 5 quart
Stackable for storage
Disposable, so there is no cured resin to clean out

Specifications

SizesPint, 1 quart, 2.5 quart, 5 quart

GraduationsOunces, milliliters and mix ratios, printed

UseEpoxy, polyester resin, gelcoat, paint and coatings

Features

Solvent-resistant, clear polypropylene construction
Printed mixing ratios (1:1, 2:1, 3:1, 4:1, and more)
Easy-to-read graduations in oz. and mL
Ideal for epoxy, resin, gelcoat, adhesives, and paints
Stackable design for convenient storage
Available in 1 QT, 2.5 QT, and 5 QT sizes

View full details

How do I measure and mix resin and hardener accurately?

Use graduated mixing cups to measure resin and hardener or catalyst to the ratio on the label, then stir with a flat stick for at least a minute, scraping the sides and bottom so it blends fully. Epoxy must be measured to its exact ratio and is not forgiving; polyester takes a small percentage of MEKP by volume. Mix only what you can use within the pot life.