Composites
Kevlar Fabric for Boats: A Fabricator's Guide...
A fabricator's guide to choosing kevlar fabric for boats — covers weights, weaves, pure aramid vs...
Kevlar Fabric for Boats: A Fabricator's Guide...
A fabricator's guide to choosing kevlar fabric for boats — covers weights, weaves, pure aramid vs...
Resin Mixing Mistakes That Ruin Your Composit...
Avoid costly resin mixing mistakes on your boat project. Learn why resin not curing, too much cat...
Resin Mixing Mistakes That Ruin Your Composit...
Avoid costly resin mixing mistakes on your boat project. Learn why resin not curing, too much cat...
Chopped Strand Mat Comparison: 0.75oz vs 1.5o...
Confused by CSM weights? Compare 0.75oz, 1.5oz, and 2oz chopped strand mat to find the right fibe...
Chopped Strand Mat Comparison: 0.75oz vs 1.5o...
Confused by CSM weights? Compare 0.75oz, 1.5oz, and 2oz chopped strand mat to find the right fibe...
Customer Spotlight: Bringing a 2002 Surfboard...
Verified buyer Kylaar M. reglassed an old 2002 surfboard with our slow cure thin clear epoxy and ...
Customer Spotlight: Bringing a 2002 Surfboard...
Verified buyer Kylaar M. reglassed an old 2002 surfboard with our slow cure thin clear epoxy and ...
Gelcoat Repair and Restoration: A Complete Ho...
Learn how to do gelcoat repair the right way — from scratch and gouge repair to blister fixes. St...
Gelcoat Repair and Restoration: A Complete Ho...
Learn how to do gelcoat repair the right way — from scratch and gouge repair to blister fixes. St...
Customer Spotlight: A Poured Foam Race Seat f...
Vintage racer Bill M. used our 2 lb urethane pour foam to mold a custom-fit seat for his Lola T34...
Customer Spotlight: A Poured Foam Race Seat f...
Vintage racer Bill M. used our 2 lb urethane pour foam to mold a custom-fit seat for his Lola T34...
Silmar 249A vs 249B: One Additive Apart
Silmar 249A and 249B are the same unwaxed polyester laminating resin. The B carries an optical br...
Silmar 249A vs 249B: One Additive Apart
Silmar 249A and 249B are the same unwaxed polyester laminating resin. The B carries an optical br...
How to Thicken Epoxy: What to Add and How Much
Thicken epoxy with fumed silica: 1-2% by weight for sag control, 6-10% for structural putty. Rati...
How to Thicken Epoxy: What to Add and How Much
Thicken epoxy with fumed silica: 1-2% by weight for sag control, 6-10% for structural putty. Rati...
Is Silmar 249 a Laminating Resin?
Silmar 249 is a water-clear, UV-stabilized polyester laminating resin, the surfboard industry sta...
Is Silmar 249 a Laminating Resin?
Silmar 249 is a water-clear, UV-stabilized polyester laminating resin, the surfboard industry sta...