4" Foam Brush - 24 Pack
SKU:JEN-40B
In stock
Couldn't load pickup availability
This 24 pack of 4-inch foam brushes is for big flat areas: a cabin sole, a transom face, a deck panel or a run of bulkheads, coated in long, even strokes. The wide head spreads each load of epoxy, varnish or polyurethane across more surface, which means fewer trips back to the pot.
Working a wide panel
Lay the coat on in one direction, then tip it off lightly with the same brush while it is still wet. Twenty-four wide brushes go a long way when one brush handles a whole panel per coat. Switch to a narrower foam brush at corners, trim edges and anything the 4-inch head will not fit.
- 4 in wide foam head
- 24 brushes per pack
- Fine-celled dense foam, wood handle
- For stains, polyurethane, varnish, epoxy and resins
Specifications

What kind of brush works with polyester resin and epoxy?
Disposable natural-bristle chip brushes are the shop standard for resin and gelcoat. They are cheap enough to throw away after a batch, and the bristles hold up to the styrene in polyester. Foam brushes work for thin coats and small touch-ups but can break down in solvent-heavy resin. Buy chip brushes in bulk, since resin ruins them and they are not worth cleaning.