3" Foam Brush - 36 Pack
SKU:JEN-30B
In stock
Couldn't load pickup availability
The 3-inch foam brush in a 36 pack covers ground faster than the narrow sizes, which makes it the one to grab for seal coats on plywood bulkheads, varnish on wide brightwork, and stain or polyurethane on a hatch or seat panel. Dense, fine-celled foam keeps the coat smooth and holds bubbles to a minimum.
Picking 3 inch over 2 inch
A wider brush means fewer passes and fewer lap lines to chase while the coat is still wet. Drop to a 2-inch on rails and trim; stay with the 3-inch anywhere the panel is broad. Thirty-six brushes last a good while on a refit where every panel takes more than one coat.
- Size: 3 in wide
- Pack: 36 brushes
- Foam: fine-celled, dense
- Handle: wood
- Takes epoxy, resin, varnish, stain and polyurethane
Specifications

What kind of brush works with polyester resin and epoxy?
Disposable natural-bristle chip brushes are the shop standard for resin and gelcoat. They are cheap enough to throw away after a batch, and the bristles hold up to the styrene in polyester. Foam brushes work for thin coats and small touch-ups but can break down in solvent-heavy resin. Buy chip brushes in bulk, since resin ruins them and they are not worth cleaning.