2oz Fiberglass Chopped Strand Mat

SKU:CSM-2050-01

$8.95 USD

$8.95 yd

Sale Sold out

Shipping calculated at checkout.

93 in stock

Width: 50"

50"

Length: 1 Yard

1 Yard 3 Yard Pack 5 Yard Pack 10 Yard Roll 25 Yard Roll Full Roll (Approx. 60 Yards)

Quantity

Earn 8 Boat Points Learn More

Heavy chopped strand mat at 2 oz per square foot (18 oz per square yard), 50 in wide. This is the mat you use when you need laminate thickness quickly: hull skin repairs, deck rebuilds, mold backing, anywhere a few plies of thin mat would be a waste of time. Random fiber orientation means equal strength in every direction and good interlaminar bond between cloth plies.

Where it goes: bulk build in hull and deck repairs, backing layers behind structural cloth, mold construction.
Resin compatibility: polyester and vinyl ester. The styrene-soluble binder will not break down properly in epoxy.
Resin demand: roughly 2.4:1 resin to glass by weight, about 4.8 oz per square foot, so mix generous batches.
Width: 50 in, cut from 1 yard up to a full roll.

Heavy mat needs to be rolled out properly. Work a grooved roller through it until the white goes clear or you will leave dry spots in the middle of the ply.

Specifications

Ideal for:

- Structural reinforcement

- Large Repairs

- Heavy Layups

- Marine, Auto & Aerospace Use

Compatible with:

- Polyester resin
- Vinyl ester resins for superior adhesion.

Resin Requirements:
- 50" Width: Approximately 42oz of resin per yard

Weight
2oz per square foot
(18oz per square yard)

610gsm

Most commonly used mat for mold and boat building applications as well as automotive part construction.

Product Data Sheet

Includes

2oz fiberglass chopped strand mat by the yard

View full details

Technical Specifications

E-Glass (chopped strand)Chopped Strand MatWorks with Polyester, Vinyl Ester

MaterialE-Glass (chopped strand)

Weight2 oz/ft² (18 oz/yd²)

Weave / ConstructionChopped Strand Mat

Fiber OrientationRandom (chopped)

Available Widths50"

Full Roll Lengthapprox. 60 yd

Resin-to-Reinforcement Ratio~2.4:1 (resin:glass) by weight

Compatible ResinsPolyester, Vinyl Ester

Best ForHeavy mat for fast bulk build

Product Data Sheet

Safety Data Sheet

Compare Fabrics

Product	2oz Fiberglass Chopped Strand MatYou're viewingfrom $8.95	0.75oz Fiberglass Chopped Strand Matfrom $4.45	1.5oz Fiberglass Chopped Strand Matfrom $6.45
Material	E-Glass (chopped strand)	E-Glass (chopped strand)	E-Glass (chopped strand)
Weight	2 oz/ft² (18 oz/yd²)	0.75 oz/ft² (6.75 oz/yd²)	1.5 oz/ft² (13.5 oz/yd², 458 gsm)
Weave	Chopped Strand Mat	Chopped Strand Mat	Chopped Strand Mat
Orientation	Random (chopped)	Random (chopped)	Random (chopped)
Thickness	—	—	0.045"
Widths	50"	38", 50"	38", 50"
Full Roll	approx. 60 yd	approx. 150 yd	approx. 80 yd
Resin Ratio	~2.4:1 (resin:glass) by weight	~2.4:1 (resin:glass) by weight	~2.4:1 (resin:glass) by weight
Resins	Polyester, Vinyl Ester	Polyester, Vinyl Ester	Polyester, Vinyl Ester
Best For	Heavy mat for fast bulk build	Thin bulk/print-blocking layer behind gelcoat	Most common mat for mold and boat building
	Selected	View	View

What To Expect When You Order Fabric Rolls

Fiberglass Chop Strand Mat - Boat Suppliers

Can chopped strand mat be layered with other materials?

Absolutely. It's commonly used between layers of fiberglass cloth or woven roving to add bulk and prevent print-through in gelcoats or top layers.

Do I need to roll out air bubbles when using chopped strand mat?

Yes, it's important to use a fiberglass roller to eliminate air bubbles and ensure proper wet-out during lay-up. This improves the strength and finish of the final part.

How thick is 2oz fiberglass mat?

2 oz fiberglass mat is approximately 0.060 inches thick (about 1.5 mm) in its dry form. Once resin is applied and rolled out, the thickness compresses closer to 1.0 mm depending on resin content and pressure.

How does 2 oz mat compare to 0.75 oz or 1.5 oz fiberglass mat?

0.75 oz chopped strand mat is about 0.022–0.025 inches thick (≈0.6 mm) in dry form. Once resin is applied and rolled, it compresses closer to 0.5 mm. This lightweight mat is excellent for tight curves, cosmetic layers, and small repairs.