Polytek PolyPurge Dry Gas Blanket - Shelf Life Extender for Urethane Liquids, 10 oz

1 1

Polytek

SKU:POLY-P10

$32.95 USD

$32.95 USD ~~USD~~

Sale Sold out

Shipping calculated at checkout.

In stock

Size: 10 oz Can

10 oz Can Case of 12 Cans

Quantity

Once a container of polyurethane part A or part B has been opened, the humid air sitting on top of it is the problem. Moisture reacts with the isocyanate side, and the next pour comes out foamy, full of bubbles or soft. PolyPurge is Polytek's answer: a dry, heavier than air gas you spray into the container right before the lid goes back on. It sinks onto the liquid, pushes the damp air out of the way, and extends the shelf life of whatever is left in the can.

Specs

Type	dry gas blanket in an aerosol can, nonflammable
Use with	opened polyurethane part A and part B: urethane mold rubbers, casting plastics and two part pour foam
Gas	1,1,1,2-tetrafluoroethane (HFC-134a), heavier than air, no ozone depleting materials
Net contents	10 oz (283 g) per can, with an extension nozzle for narrow openings
Sizes	single can, case of 12 cans
Use class	industrial and professional use only
Shipping	UN1950 Aerosols, Division 2.2, limited quantity. Ground only, lower 48 states

How to use it

Pour what the job needs and wipe the container rim clean.
Fit the extension nozzle and direct the gas into the head space above the liquid, not at the liquid itself.
Reseal the lid tight straight away, while the blanket is still sitting on the surface.
Repeat every time that container gets opened.

This is the cheapest insurance there is on a part-used pail of urethane. It is worth having on the shelf next to two part pour foam and Hi-Bond pour foam, both of which carry a moisture sensitive isocyanate side, and alongside Pol-Ease 2300 on a urethane rubber bench.

Safety: contents under pressure, may burst if heated. Do not puncture or incinerate the can and keep it out of direct sun. The gas displaces oxygen, so use it with ventilation and never in a confined space.

Data sheets: Polytek PolyPurge SDS

Specifications

Material1,1,1,2-tetrafluoroethane (HFC-134a) dry gas

Package size2.6 in x 2.6 in x 8.25 in

Specifications

Manufacturer: Polytek Development Corp., Easton PA
Sizes: 10 oz (283 g) aerosol can; case of 12
Gas: 1,1,1,2-tetrafluoroethane (HFC-134a), 80 to 100 percent
Vapor density: 3.6 (air = 1)
Flammability: nonflammable
DOT: UN1950 Aerosols, Division 2.2, limited quantity, ground only
For industrial and professional use

Store the can upright in a cool, well ventilated place, out of direct sun and away from heat. Contents are under pressure: do not puncture or incinerate.

Features

Displaces moist air in opened urethane part A and part B containers
Heavier than air, so it settles over the liquid before you reseal
Nonflammable, with no ozone depleting materials
Extension nozzle directs the gas into narrow can openings
Works on urethane rubber, casting plastic and pour foam leftovers

View full details

What does PolyPurge actually do?

It replaces the humid air in a part-used container with a dry gas that is heavier than air, so the gas settles over the liquid instead of mixing away.

Moisture is what ruins opened polyurethane liquids, so blanketing the head space before you reseal extends the shelf life of the material left in the container.

Is PolyPurge nitrogen?

No, and you will see it described that way in places. Polytek's safety data sheet lists the contents as 80 to 100 percent 1,1,1,2-tetrafluoroethane, better known as HFC-134a.

It is nonflammable and contains no ozone depleting materials.