Carbon Fiber Skinning Kit - 12 in x 5 ft Twill Carbon + Epoxy + Tools

Everything you need to skin a part in real 2x2 twill carbon fiber, in one box. Skinning is the fastest way to get a true carbon finish on interior trim, dash panels, console faces, motorcycle fairings, and speaker pods: clean the part, wet out the fabric, lay it down, and build clear coats over it.

What is in the kit:

• 12 in x 5 ft strip of 5.7oz 3K 2x2 twill carbon fiber, USA woven, cut from a 60 inch roll so it is a true 5 feet
• Pint two-part epoxy kit (resin plus hardener), thin enough to wet out twill clean, cures water clear
• 2 graduated mixing cups, 2 chip brushes, 4 mixing sticks, plastic spreader
• 2 pairs of nitrile gloves and a step-by-step instruction card

Taped edges, oversize cut: every cut edge is sealed with our blue cut tape so the weave arrives fray-free, and we cut 1 inch beyond the stated size so the advertised measurement is all clean fabric. Trim the taped border during layup and you lose nothing.

Coverage: 5 square feet of fabric skins a dash kit, a pair of speaker pods, or several small trim pieces with material to spare. The epoxy is enough for the base coat and two build coats over the full strip.

Ships UPS or FedEx Ground to the lower 48. The fabric and the epoxy resin are not regulated for transport; the small hardener bottle is a limited quantity corrosive, so the kit travels by ground and cannot go by air. For structural repairs see our carbon fiber repair kits; this kit is built for cosmetic skinning over an existing part.