Carbon Fiber Skinning Kit - 12 in x 5 ft Twill Carbon + Epoxy + Tools

Everything you need to skin a part in real 2x2 twill carbon fiber, in one box. Skinning is the fastest way to get a true carbon finish on interior trim, dash panels, console faces, motorcycle fairings, and speaker pods: clean the part, wet out the fabric, lay it down, and build clear coats over it.

What is in the kit:

• 12 in x 5 ft strip of 5.7oz 3K 2x2 twill carbon fiber, USA woven, cut from a 60 inch roll so it is a true 5 feet
• Pint two-part epoxy kit (resin plus hardener), thin enough to wet out twill clean, cures water clear
• 2 graduated mixing cups, 2 chip brushes, 4 mixing sticks, plastic spreader
• 2 pairs of nitrile gloves and a step-by-step instruction card

Taped edges, oversize cut: every cut edge is sealed with our blue cut tape so the weave arrives fray-free, and we cut 1 inch beyond the stated size so the advertised measurement is all clean fabric. Trim the taped border during layup and you lose nothing.

Coverage: 5 square feet of fabric skins a dash kit, a pair of speaker pods, or several small trim pieces with material to spare. The epoxy is enough for the base coat and two build coats over the full strip.

Non-hazmat, ships everywhere. For structural repairs see our carbon fiber repair kits; this kit is built for cosmetic skinning over an existing part.