SKU:PET-A-788
Brand Pettit Part No. 84788/8478918 UPC 725469021648
Hurry, only 5 left in stock
Couldn't load pickup availability
Pettit Splash Zone Compound- 2 Quart Kit
Pettit Splash Zone is an extremely hard, abrasion and impact resistant, two-part epoxy patching compound. It applies like putty to seal, fill, patch, or re-build aluminum, wood, concrete, fiberglass, and steel. It can be applied in or out of water to repair boat hulls, buoys, seawalls, docks, bridge abutments, and more. Splash Zone provides excellent protection against corrosion of metals and erosion and deterioration of concrete or wood. Splash Zone’s rock-hard surface can be drilled, tapped, or machined.
Recommended for patching and repairing damaged underwater surfaces. Not for use in potable water.
How to Apply
How to Apply Pettit Splash Zone Epoxy Repair Compound
Surface Preparation:
- Remove all dirt, oil, grease, loose paint, rust, rotted and spalling concrete, rotted wood, marine growth and other interference materials. Adhesion of Splash Zone will only be as good as the cleanliness and soundness of the surface you're applying it to.
- Sandblasting is preferred.
Mixing Instructions:
- Mix by hand or with putty knife. Wear rubber gloves if you are sensative to epoxy or polyamide resin.
- Keep material and hands wet with water during mixing.
- Sccop a quanitity of one component from can by hand.
- Scoop out an approximately equal amount of the other component.
- Mix and knead material by hand until the yellow and black components have combined to make a uniform olive-green color.
- Apply immediately after mixing.
How to Apply
Frequently Asked Questions
What is Pettit Splash Zone Compound 2 Quart Kit used for?
Pettit Splash Zone Compound is a two-part epoxy patching and repair compound used to seal, fill, patch, or rebuild aluminum, wood, concrete, fiberglass, and steel. It is designed for repairs above or below the waterline, including damaged underwater surfaces on boat hulls, buoys, seawalls, docks, and bridge abutments.
Can Pettit Splash Zone be used for underwater repairs?
Yes. Pettit Splash Zone can be applied in or out of water and is specifically recommended for patching and repairing damaged underwater surfaces. When applied underwater, a lighter green emulsified scum layer may form on the surface; the material beneath remains undisturbed and cures properly.
How do you mix Pettit Splash Zone Compound?
Mix Pettit Splash Zone by hand or with a putty knife. Scoop approximately equal amounts of the two components and knead them together until the yellow and black components combine into a uniform olive-green color. Apply the mixed material immediately after mixing.
How thick should Pettit Splash Zone be applied?
Apply Pettit Splash Zone in a 1/8-inch to 1/4-inch layer using heavy hand pressure to displace water and air bubbles, then smooth the surface by hand. For patches or grout, force the material into the hole or crack and smooth it to the thickness needed.
What kind of surface preparation is required for Pettit Splash Zone?
Remove dirt, oil, grease, loose paint, rust, rotted or spalling concrete, rotted wood, marine growth, and other interfering materials before application. The product description states that adhesion depends on the cleanliness and soundness of the surface, with sandblasting preferred for surface preparation.
How much area does Pettit Splash Zone cover?
Pettit Splash Zone has a listed coverage rate of 13 square feet per gallon when applied to achieve the minimum dry thickness. The product requires one coat according to the listed specifications.
Can Pettit Splash Zone be used in potable water?
No. Pettit Splash Zone is specifically stated as not for use in potable water. It is recommended for patching and repairing damaged underwater surfaces and can be used above or below the waterline.
Fits / Replaces
Specifications
Specifications
Features
Blog posts
1708 vs 1808 Biaxial Fiberglass: Which Weight...
1708 vs 1808 Biaxial Fiberglass: Which Weight...
