Johnson Pump Bilge Blower Remote Mount

Johnson Pump Bilge Blower Remote Mount

Johnson Pump radial flow design uses a squirrel cage type blower wheel to produce a substantial output at relatively low RPM's. Low noise level make Johnson Pump blowers excellent for use in heads & galleys. Massive 3" diameter motor idles at 3100 RPM's assuring long life. Housings are molded of tough glass filled composite resin.

Remote Mount 3" ducts attach to both the inlet and the outlet and readily adapt to new or existing vents and collector boxes. Brackets are molded in.

Frequently Asked Questions

What is the Johnson Pump Bilge Blower Remote Mount used for?

The Johnson Pump Bilge Blower Remote Mount is a low-noise blower designed for marine applications, including use in heads and galleys. Its radial-flow design uses a squirrel cage blower wheel to produce substantial output at relatively low RPMs, while the molded glass-filled composite resin housing provides a durable construction.

What size ducts does the Johnson Pump Bilge Blower Remote Mount use?

The Remote Mount model uses 3-inch ducts that attach to both the inlet and outlet. These ducts can adapt to new or existing vents and collector boxes, providing flexibility when installing the blower into an existing marine ventilation setup.

What type of blower wheel does the Johnson Pump Bilge Blower Remote Mount have?

The blower uses a squirrel cage type blower wheel with a radial-flow design. This configuration is designed to produce substantial output while operating at relatively low RPMs. The motor idles at 3,100 RPMs and has a 3-inch diameter.

Can the Johnson Pump Bilge Blower Remote Mount be used with existing vents or collector boxes?

Yes. The 3-inch ducts on the Remote Mount model readily adapt to new or existing vents and collector boxes. This allows the blower to be incorporated into an existing marine ventilation arrangement without limiting the application to newly installed components.

What is the Johnson Pump Bilge Blower Remote Mount housing made of?

The blower housing is molded from tough glass-filled composite resin. The brackets are also molded in, providing an integrated mounting design for the Remote Mount configuration.