Interlux Micron CSC Antifouling Bottom Paint

SKU:ILX-5580Q

$97.99 USD

Sale Sold out

Shipping calculated at checkout.

Hurry, only 1 left in stock

Color: Blue

Blue Green Red Black Shark White

Size: Quart

Quart Gallon Case of 2 Gallons

Quantity

Order several sizes at once color by size, one add to cart

Color	Quart	Gallon	Case of 2 Gallons
Blue	Blue Quart $97.99	out	out
Green	Green Quart $97.99	Green Gallon $313.59	out
Red	Red Quart $97.99	Red Gallon $313.59	out
Black	Black Quart $97.99	out	out
Shark White	Shark White Quart $97.99	Shark White Gallon $313.59	out

Nothing selected yet

Earn 97 Boat Points Learn More

Micron CSC is the multi-season side of the Interlux ablative range. The copper-copolymer chemistry releases biocide at a controlled rate as the film polishes away, so the coating keeps working when the boat sits and when it hauls out and goes back in. Low build-up means the bottom does not turn into a sanding project after a few seasons.

Copper-copolymer ablative with controlled-solubility biocide release
Self-polishing, so paint build-up stays low season over season
For fiberglass, wood and properly primed steel or lead below the waterline
Not for aluminum hulls or drives
Typically 2 to 3 full coats with an extra stripe coat on high-wear areas
Blue, green, red, black and Shark White in quart, gallon and 2 gallon case

Confirm compatibility with the existing bottom paint using Interlux's chart before you recoat. Old paint has to be aged, tightly adhered and sound.

Specifications

Package size5 in x 5 in x 5 in

Shipping weight4.2

Specifications

Substrates: Fiberglass, wood, and properly primed steel or lead below the waterline (not for aluminum hulls or drives).
Existing antifouling: Confirm compatibility with the Interlux antifouling compatibility chart. The existing paint must be aged, tightly adhered, and in good condition.
Coats: Typically 2–3 full coats are recommended, with an extra stripe coat on high-wear areas such as the waterline, chines, rudders, and leading edges.
Methods: Apply by brush, roller, or spray using equipment suitable for solvent-based bottom paints, following all safety and ventilation guidelines.

Features

Multi-season ablative protection: Micron Technology provides long-lasting defense against a wide range of fouling in all water types when applied at the recommended film thickness.
Copper-copolymer formula: Uses a controlled-solubility copolymer with cuprous oxide to maintain an active biocide layer at the paint surface throughout the season.
Self-polishing, low build-up: The coating gradually erodes in a controlled way, like a bar of soap, helping prevent excessive paint build-up and reducing the amount of sanding needed at recoat.
Haul and relaunch flexibility: Micron CSC can be hauled for storage and relaunched later without losing effectiveness, provided the film is in good condition and properly cleaned before going back in the water.
Smoother, more efficient hull: The polishing action helps the bottom remain smooth, which can improve speed and fuel efficiency compared to rough or heavily built-up coatings.
Versatile application: Can be applied by brush, roller, or spray over most existing antifouling paints that are in sound condition, following the Interlux compatibility guidelines.
Scrub the bottom to remove slime, salts, and loose growth, then rinse and allow to dry.
Lightly sand with the recommended grit if required to create a smooth, dull surface.
Remove sanding residue and apply the recommended number of coats of Micron CSC.
Remove loose, flaking, or excessively built-up antifouling by appropriate methods (chemical stripper, sanding, or blasting as recommended for the substrate).
Once the substrate is clean and sound, follow the bare fiberglass, bare wood, or primed metal system specified by Interlux before applying Micron CSC.

View full details