Toon-Brite Protective Clear Coat For Boats

SKU:T-B-PA1000

$22.49 USD

Sale Sold out

Shipping calculated at checkout.

16 in stock

Size: 12 oz

12 oz Quart Gallon

Quantity

Earn 22 Boat Points Learn More

A clear protective coating for metal and fiberglass surfaces that have gone dull. It restores color to faded or oxidized aluminum and puts a barrier over the top, which is the practical way to keep a pontoon or a set of rails looking right without polishing them every month.

For aluminum, fiberglass, brass, copper, stainless and most metal surfaces
Corrosion resistant and non-conductive formula
Restores and rejuvenates faded or oxidized surfaces
Will not chip or peel
Sizes: 12 oz, quart and gallon

Clean and dry the surface completely first. A clear coat over oxidation just locks the oxidation in where you can see it and cannot reach it. Work in the shade on a cool surface and put it on thin. A clear coat flashing off in direct sun sets before it levels and leaves lap marks.

Specifications

Part NumbersPA1000 (12 oz), P100QT (quart), P1000 (gallon)

TypeProtective clear coat

SurfacesAluminum, fiberglass, brass, copper, stainless and most metals

PropertiesCorrosion resistant, non-conductive

Sizes12 oz, quart, gallon

Package size8 in x 2.63 in x 2.63 in

Shipping weight1

Features

Makes Future Cleaning Much Easier
Works On Aluminum, Fiberglass, Brass, Copper, Stainless and Most Metal Surfaces
Protects For Years Against Oxidations, UV Rays, Weathering, Stains, Salt Spray and Electrolysis
Restores and Rejuvenates Faded Or Oxidized Surfaces
Will Not Chip Or Peel
Corrosion Resistant
Great Color Restorer
Reduces Maintenance For Both Metal and Fiberglass
Non-Conductive
A: Clear-coat can be applied to Aluminum, Fiberglass, Copper, Brass, Stainless Steel, or any other surface you want to prevent from staining and discoloring.
A: Clear-coat is virtually invisible on all surfaces other than a high polished surface. On a high polish finish, Clear-coat when wiped can sometimes leave slight sheen. This will some what lessen with a second coat and it also tends to diminish with time.
A: Yes, Clear-coat can be applied to dull painted surfaces that are beginning to get chalky and oxidized. Clear-coat will prevent the chalky finish from returning as well as bring back a rich shiny finish.
A: Clear-coat will protect your surfaces from Oxidation, Stains, Weathering, Salt Spray, UV Rays, Corrosion and Electrolysis.
A: On boats that are kept on the trailer, or on a lift, it’s not uncommon to get 3 to 4 years of protection, If you leave your boat in the slip all season long, from the water line down, it should last a couple of years or more. There are just too many variables such as water conditions and content, as well as severity of marine growth etc. But from the water line up, you can expect the same protection as any other boat. On things like RV’s ECT., you can expect 3 to 4 years.
A: Clear-coat can be applied at any temperature but, you’ll get a better finish at 50 degrees, than at 90 degrees.
A: Yes you can, but try to avoid direct sunlight if at all possible.
A: Although Clear-coat dries to the touch in about 15 minutes, it takes as little as 2 or 3 hours, or as long as 24 hours depending on temperature and humidity.
A: No, All you need to do is clean with Toon-brite, Aluminum or Fiberglass Cleaner, and apply the new coat.