A sample set of the vacuum bagging consumables so you can run the process on a test panel before committing to full rolls. Bagging is one of those things that reads simple and then bites you on the first real part: a leak at a sealant tape joint, breather that saturates and stops pulling, a bag that bridges into a corner and tears. Cheaper to find that out on a sample than on a hull.
Bag film to seal the part under vacuum.
Breather to keep air paths open to the port and absorb bled resin.
Peel ply to leave a clean, bondable surface after cure.
Sized for a test panel, not a production part.
Run a dry bag first with no resin. Pull vacuum, close the valve, and watch the gauge for five minutes. If it drops, you have a leak to find, and finding it dry is a lot better than finding it wet.
The pack pays for itself. Every sample order ships with a card carrying a single-use code worth $25 off your next order of $100 or more from our own composites line. The code is unique to your card and works once.
Specifications
Ideal for boat building, repairs, and composite projects, these samples help you choose the right fiberglass for your application.
