Carbon Fiber Fabric Strip 6 in x 5 ft - 5.7oz 3K 2x2 Twill, Taped Edges

A 6 in x 5 ft strip of 5.7oz 3K 2x2 twill carbon fiber, cut straight across a 60 inch USA-woven roll. The entry-size piece of real laminating carbon: enough for a run of small parts without paying for a yard.

Specs:

• 5.7oz per square yard, 3K tow, 2x2 twill weave
• 6 in x 60 in, one continuous piece
• Compatible with epoxy, polyester, and vinyl ester resin
• USA woven, first quality

Taped edges, oversize cut: every cut edge is sealed with our blue cut tape so the weave arrives fray-free, and we cut 1 inch beyond the stated size so the advertised measurement is all clean fabric. Trim the taped border during layup and you lose nothing.

Ships rolled on a tube, never folded, so it arrives with no creases and lays out flat.

Right size for: rod building and tube wraps, knife scales, drone and RC parts, reinforcing strips along stringers and paddle shafts, and small cosmetic skins. If the project wants more width, step up to the 12 in x 5 ft strip.