Carbon Fiber Fabric Strip 12 in x 5 ft - 5.7oz 3K 2x2 Twill, Taped Edges

A true 12 in x 5 ft strip of 5.7oz 3K 2x2 twill carbon fiber, cut straight across a 60 inch USA-woven roll. This is real first-quality laminating fabric, the same roll stock we sell by the yard, not seconds or offcuts.

Specs:

• 5.7oz per square yard, 3K tow, 2x2 twill weave
• 12 in x 60 in (5 square feet), one continuous piece
• Compatible with epoxy, polyester, and vinyl ester resin
• USA woven, first quality

Taped edges, oversize cut: every cut edge is sealed with our blue cut tape so the weave arrives fray-free, and we cut 1 inch beyond the stated size so the advertised measurement is all clean fabric. Trim the taped border during layup and you lose nothing.

Ships rolled on a tube, never folded, so it arrives with no creases and lays out flat.

Right size for: skinning dash and trim panels, wrapping tubes, reinforcing skate decks and paddle shafts, knife scale layups, and repairs where a full yard is more than the job needs. Pair it with our pint epoxy kit or grab the complete Carbon Fiber Skinning Kit.