Carbon Fiber Patch Kit - 12 in x 12 in Twill Carbon + Epoxy

The smallest honest carbon repair. One 12 inch square of real 5.7 oz 3K 2x2 twill, enough epoxy to wet it out and build two clear coats over it, and the cups, brushes and sticks to do the job without a second order.

What is in the kit:

• 12 in x 12 in square of 5.7oz 3K 2x2 twill carbon fiber, taped edges
• 12 oz two-part epoxy kit (8 oz resin plus 4 oz hardener), thin enough to wet out twill clean
• 2 graduated mixing cups, 2 chip brushes, 4 stir sticks
• Nitrile gloves and a step-by-step instruction card

Taped edges, oversize cut: every cut edge is sealed with our blue cut tape so the weave arrives fray-free, and we cut 1 inch beyond the stated size so the advertised measurement is all clean fabric. Trim the taped border during layup and you lose nothing.

Coverage: one square foot skins a knife scale set, a drone arm, a small trim piece, or patches a crack with two overlapping layers. For a dash or a fairing step up to the 6 inch or 12 inch strip kits.

Non-hazmat, ships everywhere. Epoxy is the correct resin here: it bonds to cured laminate, will not attack foam core, and stays clear so the weave shows.