Economy Fiberglass Roller

SKU:FR-1310A

$7.99 USD

Sale Sold out

Shipping calculated at checkout.

Hurry, only 9 left in stock

Diameter: 3/8"

3/8" 1/2" 3/4"

Length: 1"

1" 2" 3" 4" 5"

Quantity

Order several sizes at once diameter by length, one add to cart

Diameter	1"	2"	3"	4"	5"
3/8"	3/8" 1" $7.99	3/8" 2" $7.99	3/8" 3" $8.49	3/8" 4" $8.79	3/8" 5" $8.99
1/2"	—	—	1/2" 3" $8.49	1/2" 4" $8.79	1/2" 5" $8.99
3/4"	—	—	3/4" 3" $8.99	—	—

Nothing selected yet

Earn 7 Boat Points Learn More
Free Shipping on orders over $199 Learn More

A basic all-aluminum bubble buster for consolidating wet laminate. It is not built like our detail rollers and will not last as long on production work, but it does the same job: drive trapped air out from between plies and press resin through mat and cloth so you are not sanding into voids later.

All-aluminum heads. Survives acetone cleanup and does not swell in styrene the way a plastic head can.
Diameters: 3/8 in, 1/2 in and 3/4 in.
Widths: 1 in through 5 in, so you can match the roller to the size of the ply.
Where it goes: flat and gently curved surfaces. For inside angles, use a corner roller.

Clean it in acetone before the resin kicks. Once cured resin locks the grooves, the roller stops pulling air and starts dragging the cloth.

Specifications

Head materialAluminum

Diameters3/8 in, 1/2 in, 3/4 in

Widths1 in through 5 in depending on diameter

UseConsolidating wet fiberglass laminate

View full details

What rollers do I use to roll out fiberglass?

Use a metal or paddle laminating roller to compact the laminate and drive out trapped air after you wet out the glass, which prevents weak, bubble-filled spots. Reach for a corner roller on inside corners, a radius roller on curves, and a detail roller in tight areas. Wet out first with a chip brush or squeegee, then roll until no more air bubbles rise.