Pettit 120 Brushing Thinner - Quart

Pettit 120 Brushing Thinner

Pettit 120 Brushing Thinner is a general purpose thinner for thinning brushing enamels for easier application. Many paints when stored for some time before use will increase in viscosity and should be thinned with a good thinner for normal brush application. 120 Brushing Thinner evaporates at a moderate rate and is completely out of the paint film in several hours. Surfaces can also be washed with this thinner prior to preparation or painting to remove any contamination or sanding residue.

Up to 10% is the normal recommended usage, some very hot and windy days may require more thinner. 

Use: Add up to 10% of the thinner to any of Pettit enamel, primer and varnishes. Mix in thoroughly.

**Can Be Shipped Ground Only in the 48 Contiguous States**

Frequently Asked Questions

What is Pettit 120 Brushing Thinner used for?

Pettit 120 Brushing Thinner is a general-purpose thinner designed to make Pettit brushing enamels easier to apply. It can also be used with Pettit primers and varnishes. The thinner evaporates at a moderate rate and leaves the paint film over several hours.

How much Pettit 120 Brushing Thinner should I add to paint?

The normal recommended amount is up to 10% of the paint, primer, or varnish volume. Add the thinner to the product and mix thoroughly. Some very hot and windy conditions may require more thinner.

Can Pettit 120 Brushing Thinner be used for surface preparation?

Yes. Pettit 120 Brushing Thinner can be used to wash surfaces before preparation or painting to help remove contamination or sanding residue. The surface should be properly prepared before applying paint, primer, or varnish.

What Pettit products can be thinned with Pettit 120 Brushing Thinner?

Pettit 120 Brushing Thinner can be added to Pettit enamels, primers, and varnishes. Use up to 10% as the normal recommended amount and mix the thinner thoroughly into the coating.