{"product_id":"formula-five-mold-cleaner-2","title":"Formula Five Mold Cleaner #2 - Solvent Mold Cleaner for Silicone, Grease \u0026 Release Build-Up","description":"\u003cp\u003eEvery production mold picks up a film of old wax, silicone, grease and resin scum, and that film is what shows up later as dull parts, streaks and gel coat pre-release. Formula Five Mold Cleaner #2 is Rexco's ready-to-use solvent cleaner: it dissolves the build-up so it wipes off with a cotton cloth, with no abrasives and without softening or dulling a good mold surface.\u003c\/p\u003e\n\u003cdiv class=\"bs-spec-block\"\u003e\n\u003c!--bs-body-v1--\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable class=\"bs-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003enon-abrasive solvent mold cleaner, ready to use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRemoves\u003c\/th\u003e\n\u003ctd\u003ewax build-up, silicone, grease, dirt, light resin scumming, excess uncured semi-permanent release, residue from other cleaners and water spotting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDoes not remove\u003c\/th\u003e\n\u003ctd\u003efully cured semi-permanent mold release or cured resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse on\u003c\/th\u003e\n\u003ctd\u003efiberglass, aluminum, steel and thermoset tooling; warm molds are fine. Test rubber molds on a non-cosmetic area first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWork area\u003c\/th\u003e\n\u003ctd\u003esections up to 5 sq ft (0.5 m2) at a time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSizes\u003c\/th\u003e\n\u003ctd\u003e1 US gallon (3.79 L) can, case of 4 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFlash point\u003c\/th\u003e\n\u003ctd\u003ebelow 0 F (-18 C), highly flammable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eUN1993 Class 3 PG II. UPS Ground only, lower 48 states, no air service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eWork in a well ventilated area with solvent resistant gloves and eye protection.\u003c\/li\u003e\n\u003cli\u003eDampen a clean cotton cloth and wipe a section no larger than 5 sq ft (0.5 m2).\u003c\/li\u003e\n\u003cli\u003eWipe the dissolved residue off with a fresh cloth before the cleaner flashes dry, overlapping into the next section.\u003c\/li\u003e\n\u003cli\u003eFor heavy wax deposits, work the cleaner over the surface with a stiff solvent resistant bristle brush, then wipe. Repeat on stubborn build-up.\u003c\/li\u003e\n\u003cli\u003eTape test in several spots before you apply release. If the tape grabs hard, the surface is clean.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eMold Cleaner #2 is step one of the Formula Five mold care system. Polish the cleaned surface with \u003ca href=\"\/products\/formula-five-clean-n-glaze\"\u003eClean 'N Glaze\u003c\/a\u003e, then build release coats with \u003ca href=\"\/products\/formula-five-mold-release-wax\"\u003eFormula Five Mold Release Wax\u003c\/a\u003e or a \u003ca href=\"\/products\/pva-10-mold-release-partall-10\"\u003ePVA film\u003c\/a\u003e. It also earns its place between pulls, cleaning one area of a mold before a semi-permanent release touch-up. The full shelf is in \u003ca href=\"\/collections\/mold-release-agents\"\u003emold release agents\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e toluene and methanol based, highly flammable, for industrial use only. Keep it away from heat, sparks and hot metal, wear organic vapor respiratory protection if ventilation is poor, and never return used cleaner to the can or re-dip a contaminated cloth. Lay solvent soaked rags out flat to dry before disposal.\u003c\/p\u003e\n\n\u003cp\u003e\u003c!--bs-datasheets-v1--\u003e\u003cstrong\u003eData sheets:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/Formula-Five-Mold-Cleaner-2-Application-Guide.pdf?v=1789512268\" target=\"_blank\" rel=\"noopener\"\u003eFormula Five Mold Cleaner #2 Application Guide\u003c\/a\u003e · \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/Formula-Five-Mold-Cleaner-2-SDS.pdf?v=1789512271\" target=\"_blank\" rel=\"noopener\"\u003eFormula Five Mold Cleaner #2 SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Rexco","offers":[{"title":"1 Gallon","offer_id":52654925349166,"sku":"REXC-MC2128","price":169.95,"currency_code":"USD","in_stock":true},{"title":"Case of 4 Gallons","offer_id":52654925381934,"sku":"REXC-MC2128-CSE","price":569.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/formula-five-mold-cleaner-2-gallon.jpg?v=1789512275","url":"https:\/\/boatsuppliers.com\/products\/formula-five-mold-cleaner-2","provider":"Boat Suppliers","version":"1.0","type":"link"}