{"title":"Mold Release Wax","description":"\u003cp\u003ePaste wax is the base layer of a mold release system. On a new mold, build several thin coats, let each one haze, then buff, and add a maintenance coat every few pulls after that. Partall #2 and Meguiar's Mirror Glaze No. 8 are the two standards; the high temperature waxes are for tooling that sees cure heat.\u003c\/p\u003e\u003cp\u003eBack wax up with \u003ca href=\"\/collections\/pva-mold-release\"\u003ePVA mold release\u003c\/a\u003e on a new mold or any part you cannot afford to lose.\u003c\/p\u003e","products":[{"product_id":"tr-104-high-temp-mold-release","title":"TR 104 High Temp Mold Release","description":"\u003cp\u003eTR-104 is the paste wax you use when the tool gets hot. Standard carnauba mold release softens and transfers at elevated cure temperatures, which is how you end up with wax in the part surface and a mold that will not release cleanly. This one blends high grade carnauba with heat-resistant synthetic additives specifically to hold up under that heat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh temperature service.\u003c\/strong\u003e Formulated for tooling running elevated cure temperatures where standard wax breaks down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarnauba paste wax.\u003c\/strong\u003e Rewax after each of the first 2 or 3 parts on a fresh mold, then see how many pulls you get between coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh gloss surface finish\u003c\/strong\u003e with reduced buildup in the tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with epoxy, polyester and gelcoat\u003c\/strong\u003e tooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWipe on, let haze, buff off.\u003c\/strong\u003e Build several coats on a new mold.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt pairs with PVA when the tool is new or the part is a one-off. Wax first, then PVA over it; PVA on a bare unwaxed mold is not a substitute for building the wax film underneath.\u003c\/p\u003e","brand":"TR Industries","offers":[{"title":"Default Title","offer_id":51045483446574,"sku":"WAX-TR104","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/TR104HighTempMoldRelease_1.jpg?v=1756681304"},{"product_id":"partall-2-paste-wax","title":"Partall #2 Paste Wax – Mold Release Wax for Fiberglass \u0026 Composite Molds","description":"\u003cp\u003ePartall #2 is the paste wax that goes on every mold before anything else. Buffed out to a hard shine, it lets hand layup and vacuum bagged parts come off a seasoned mold with no other release under them, and because it builds in coats you can touch up one worn spot instead of redoing the whole surface.\u003c\/p\u003e\n\u003ch3\u003eWhen wax alone is enough\u003c\/h3\u003e\n\u003cp\u003eOn a mold that has already pulled parts and holds a deep shine, the wax does the job by itself. On a brand new mold, a fresh plug or a one-off, put \u003ca href=\"\/products\/pva-10-mold-release-partall-10\"\u003ePVA #10 mold release\u003c\/a\u003e over the wax as a second barrier until the surface is seasoned. You can read the condition of the wax by its shine.\u003c\/p\u003e\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHydrocarbon and microcrystalline paste wax for fiberglass and carbon fiber molds\u003c\/li\u003e\n\u003cli\u003eFor hand layup and vacuum bagging\u003c\/li\u003e\n\u003cli\u003e12 oz tub or 7 lb tub, single or by the case of 12 or 4\u003c\/li\u003e\n\u003cli\u003eStore at 90°F (32°C) or below, away from heat and open flame\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeighing wax against a spray, PVA or a semi-permanent release? Every type is side by side in \u003ca href=\"\/collections\/mold-release-agents\"\u003emold release agents\u003c\/a\u003e.\u003c\/p\u003e","brand":"Partall","offers":[{"title":"12oz (0.75lb)","offer_id":51045535482158,"sku":"REX-212","price":12.03,"currency_code":"USD","in_stock":true},{"title":"Case of 12 (12oz Tubs)","offer_id":51045535514926,"sku":"REX-212CSE","price":101.87,"currency_code":"USD","in_stock":true},{"title":"7 lb Tub","offer_id":51045535547694,"sku":"REX-270","price":45.83,"currency_code":"USD","in_stock":true},{"title":"Case of 4 (7 lb Tubs)","offer_id":51045535580462,"sku":"REX-270CSE","price":159.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/Partall_2PasteWax_5fe359af-3085-4df5-b48e-575032063042.jpg?v=1756685346"},{"product_id":"partall-high-temp-mold-release-wax","title":"Partall High-Temp Mold Release Wax","description":"\u003cp\u003eA paste release wax formulated for tooling that gets hot. Ordinary mold wax softens and gives up when the part exotherms or when the cure schedule goes into an oven, which is exactly when a stuck part costs you a mold. This one holds to 350 F.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaximum temperature 350 F\u003c\/li\u003e\n\u003cli\u003eNon-silicone formula, so it will not contaminate surfaces you plan to paint\u003c\/li\u003e\n\u003cli\u003ePaste wax, buffed on and polished to a gloss\u003c\/li\u003e\n\u003cli\u003eFor composite parts cured at elevated temperature\u003c\/li\u003e\n\u003cli\u003eBack it up with PVA on new molds and one-off plugs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBuild several thin coats and let each one haze before buffing. One heavy coat leaves soft wax that prints into the part surface instead of releasing it. Keep a dedicated applicator cloth for release wax and never let a shop rag that has touched solvent near it. Contaminated wax is worse than no wax.\u003c\/p\u003e","brand":"Partall","offers":[{"title":"Default Title","offer_id":51582166401326,"sku":"REXC-HT12","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/PartallHigh-TempMoldReleaseWax.jpg?v=1767200127"},{"product_id":"meguiars-mirror-glaze-no-8","title":"Meguiar’s Mirror Glaze No. 8 Mold Release Wax","description":"\u003cp\u003eM08 is the paste wax production shops keep on the shelf because it goes a long way between coats. Buff it onto a seasoned mold and you get multiple part releases from one application, which is the difference between waxing between every pull and waxing between runs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProfessional composite mold release paste wax\u003c\/li\u003e\n\u003cli\u003eFormulated for maximum releases per application\u003c\/li\u003e\n\u003cli\u003eFor fiberglass, carbon and composite molds and plugs\u003c\/li\u003e\n\u003cli\u003eBuff to a hard gloss; the shine tells you the coverage is even\u003c\/li\u003e\n\u003cli\u003eBack it up with a PVA film on new molds and one-off plugs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the wax has dried to the inside of the can in storage, that is dried wax and not rust. Wipe it out with a cloth and keep going.\u003c\/p\u003e","brand":"Meguiar's","offers":[{"title":"Default Title","offer_id":51582172889390,"sku":"MEG-108","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/Meguiar_sMirrorGlazeNo.8MoldReleaseWax.jpg?v=1767200623"},{"product_id":"formula-five-mold-release-wax","title":"Formula Five Mold Release Wax","description":"\u003cp\u003eFormula Five is the paste wax most production shops run on a seasoned mold, and it is the base layer of every release system: wax first, PVA over it only when the tool is new or the part is a one-off you cannot afford to lose. It is blended for good rub-out and for the maximum number of release cycles per application.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhere it goes:\u003c\/strong\u003e gelcoated molds and tooling surfaces where surface quality and finish consistency matter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild the film in coats.\u003c\/strong\u003e A new mold wants several coats with buffing between them, not one heavy application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh gloss.\u003c\/strong\u003e The wax buffs out to a gloss that transfers to the part surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximizes releases per application,\u003c\/strong\u003e so you are not rewaxing after every pull on a seasoned tool.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLet each coat haze before you buff it, and buff with a clean cloth per coat. Buffing a hazed coat with a wax-loaded rag just moves it around and leaves streaks that print into the next part.\u003c\/p\u003e","brand":"Rexco","offers":[{"title":"Default Title","offer_id":51582178492718,"sku":"REX-F5","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/FormulaFiveMoldReleaseWax.jpg?v=1767202173"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/collections\/Partall_2PasteWax_5fe359af-3085-4df5-b48e-575032063042.jpg?v=1792773520","url":"https:\/\/boatsuppliers.com\/collections\/mold-release-wax.oembed","provider":"Boat Suppliers","version":"1.0","type":"link"}