{"title":"Fillers, Fairing \u0026 Putty","description":"\u003cp\u003eThickeners, lightweight fillers, fairing compounds and ready-mixed putties.\u003c\/p\u003e","products":[{"product_id":"pettit-ez-fair-two-part-epoxy-fairing-compound","title":"Pettit EZ-Fair Two-Part Epoxy Fairing Compound","description":"\u003cp\u003ePettit EZ-Fair Two-Part Epoxy Fairing Compound EZ-Fair Epoxy Fairing Compound 7050 is a lightweight, two-part epoxy putty designed for filling and smoothing surface imperfections above and below the waterline. The special resins used in EZ-Fair impart a high degree of water and chemical resistance to the product, making it an integral part of the Pettit Gelcoat Blister Repair System. In addition, EZ-Fair is the product of choice for fairing metal keels or any underwater surface. Use it for level\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Quart","offer_id":49815276224814,"sku":"PET-7050Q","price":95.49,"currency_code":"USD","in_stock":true},{"title":"250 ml","offer_id":49815276257582,"sku":"PET-7050","price":52.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/EZ-Fair__53180.1737846024.jpg?v=1739846984"},{"product_id":"west-system-406-colloidal-silica-adhesive-filler","title":"West System 406 Colloidal Silica Adhesive Filler","description":"\u003cp\u003e406 Colloidal Silica is fumed silica, the workhorse thixotrope: stir it into mixed 105 epoxy and the resin stops sagging, holds a fillet, and bonds with the highest all-around strength of the West filler range. If you only stock one filler for adhesive work, this is the one.\u003c\/p\u003e\n\u003c!--bs-body-v1--\u003e\n\u003cp\u003eAdd to mixed resin in small shots until the batch hangs on a vertical stir stick; a little goes a long way and over-thickened epoxy wets nothing. Cured mix is near-clear, hard, and not meant for fairing. It also works in polyester and vinyl ester, where the same material shows up under the Cabosil name.\u003c\/p\u003e\n\u003cp\u003eSame material, shop quantity: our \u003ca href=\"\/products\/aerosil-cabosil-fumed-silica\"\u003eAerosil\/Cabosil fumed silica\u003c\/a\u003e jars are the identical thixotrope in quart to 4-gallon sizes, which is the difference between buying silica by the ounce and buying it by the job. The spec table below puts them side by side.\u003c\/p\u003e","brand":"West System","offers":[{"title":"406-2 -- 1.7 oz","offer_id":49815276880174,"sku":"SWES-406-2","price":23.73,"currency_code":"USD","in_stock":true},{"title":"406-7 -- 5.5 oz","offer_id":49815276912942,"sku":"SWES-406-7","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/SWES-406.1__02186.1722499742.jpg?v=1739846978"},{"product_id":"west-system-405-filleting-blend-filler","title":"West System 405 Filleting Blend Filler","description":"\u003cp\u003e405 Filleting Blend is the wood-boat filler: a brown structural blend that thickens 105 epoxy into fillets that finish to a wood tone under varnish. Stitch-and-glue builders and anyone gluing brightwork use it so the glue lines disappear instead of shouting white.\u003c\/p\u003e\n\u003c!--bs-body-v1--\u003e\n\u003cp\u003eMix into combined 105\/hardener until the blend holds a fillet shape, pull the fillet with a rounded stick, and sand after cure; it sands easier than 403 or 404 but is still a structural filler, not a fairing compound. The color splits the difference between okoume and meranti nicely and darkens slightly when varnished.\u003c\/p\u003e\n\u003cp\u003eOn painted work where the fillet color never shows, plain \u003ca href=\"\/products\/1-32-milled-fiber\"\u003emilled fiber\u003c\/a\u003e with a pinch of \u003ca href=\"\/products\/aerosil-cabosil-fumed-silica\"\u003efumed silica\u003c\/a\u003e makes an equivalent structural fillet for less money per fillet foot.\u003c\/p\u003e","brand":"West System","offers":[{"title":"Default Title","offer_id":49815278715182,"sku":"SWES-405","price":29.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/SWES-405__77857.1722508203.jpg?v=1739846971"},{"product_id":"interlux-watertite-2-part-epoxy-marine-filler","title":"Interlux Watertite 2-Part Epoxy Marine Filler","description":"\u003cp\u003eInterlux Watertite 2-Part Epoxy Marine Filler Compound Interlux Watertite is a quick drying 2-part epoxy filler suitable for use on Fiberglass, Metals, Epoxy and rigid Wood constructions. The formulation does not shrink and is extremely water resistant, making it suitable for osmosis damage repairs. It has a long easy-to-sand window and can be applied to a thickness of 34 without sagging. Its superior spreadability makes it an ideal glazing compound for filling small nicks and scratches. Feature\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"500 ml","offer_id":49815282581806,"sku":"ILX-YAV135","price":62.99,"currency_code":"USD","in_stock":true},{"title":"1 Litre","offer_id":49815282614574,"sku":"ILX-YAV135L","price":103.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/WatertiteEpoxyFiller__72511.1737823039.jpg?v=1739846962"},{"product_id":"formula-27-polyester-miracle-mender-filler","title":"Formula 27 Polyester \"Miracle Mender\" Filler","description":"\u003cp\u003ePermanent repair of fiberglass, wood, metal, stucco and drywall. High quality, white plastic filler for filling dents, scrapes and gouges. This product does not shrink after curing. A true miracle mender that wont crack or pop out. A long time favorite of consumers everywhere. Formula 27 can be tinted with Evercoat Coloring Agents. White cream hardener is included. WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY SDS California Residents WARNING Cancer and Reproductive Harm - P65Warnings.c\u003c\/p\u003e","brand":"Fiberglass Evercoat","offers":[{"title":"Quart","offer_id":49815285530926,"sku":"F-E-570","price":83.49,"currency_code":"USD","in_stock":true},{"title":"Pint","offer_id":49815285563694,"sku":"F-E-571","price":58.99,"currency_code":"USD","in_stock":true},{"title":"Half Pint","offer_id":49815285596462,"sku":"F-E-572","price":36.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/f-e-572_lg__58495.1558142986.jpg?v=1739846939"},{"product_id":"starbrite-aluminum-epoxy-putty-stick","title":"Starbrite Aluminum Epoxy Putty Stick","description":"\u003cp\u003eStarbrite Aluminum Epoxy Putty Stick Makes permanent and emergency repairs on aluminum boats, outdrives, fuel and water tanks and other aluminum parts. Starbrite Epoxy Putty Stuck forms a high-strength bond in minutes, even under water. No boat should be without as this can be the product that saves you from sinking. You never know when a thru hull fitting gets knocked off or a manifold blows, this epoxy stick can save the day and maybe the whole trip. Easy to use just hand knead for 1 minute an\u003c\/p\u003e","brand":"Starbrite","offers":[{"title":"Default Title","offer_id":49815290937646,"sku":"STR-87004","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/087004__44507.1722496327.jpg?v=1739846916"},{"product_id":"west-system-404-high-density-filler","title":"West System 404 High Density Filler","description":"\u003cp\u003e404 High-Density is the maximum-strength adhesive filler in the West System line, made for hardware bonding and high-load joints: engine mounts, chainplates, drilled-and-filled fastener holes, anywhere the cured joint carries real compression.\u003c\/p\u003e\n\u003c!--bs-body-v1--\u003e\n\u003cp\u003eThicken mixed 105 epoxy with 404 until it holds a peak, fill the bore or bed the hardware, and let it reach working strength before loading. It cures hard enough that fairing with it is a punishment; that is the point. For the classic drill-oversize-fill-redrill treatment on deck hardware, 404 is the filler West's own manuals call for.\u003c\/p\u003e\n\u003cp\u003eBuilding your own bedding compound? \u003ca href=\"\/products\/1-32-milled-fiber\"\u003eMilled fiber\u003c\/a\u003e plus \u003ca href=\"\/products\/aerosil-cabosil-fumed-silica\"\u003efumed silica\u003c\/a\u003e in epoxy gets you a comparable high-strength putty from shop-quantity jars; the comparison below shows how they line up.\u003c\/p\u003e","brand":"West System","offers":[{"title":"15.2 oz","offer_id":49815297229102,"sku":"SWES-404-15","price":31.75,"currency_code":"USD","in_stock":true},{"title":"45.6 oz","offer_id":49815297261870,"sku":"SWES-404-45","price":67.04,"currency_code":"USD","in_stock":true},{"title":"30 lb Bag","offer_id":52408630149422,"sku":"SWES-404-B","price":334.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/SWES-404.1__51868.1722361956.jpg?v=1739846879"},{"product_id":"pettit-ez-tex-rapid-cure-epoxy-repair","title":"Pettit EZ-TEX Rapid Cure Epoxy Repair","description":"\u003cp\u003ePettit EZ-TEX Rapid Cure Epoxy Repair Pettit EZ-TEX Rapid Cure is an easy to use marine epoxy compound for use when a high-strength, waterproof, permanent repair is needed. Ideal for quick mechanical repairs dockside or at sea, this unique formula creates a tenacious bond to most surfaces. Its buttery consistency will not sag or shrink and is excellent for filling cracks, gouges, and voids. EZ-Tex can be used to fill stripped screw holes and areas where hardware has been pulled out or removed. A\u003c\/p\u003e","brand":"Pettit","offers":[{"title":"Default Title","offer_id":49815297392942,"sku":"PET-7200","price":19.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/7200-EZ-Tex-Rapid-Cure__58737.1722510396.jpg?v=1739846878"},{"product_id":"marine-tex-epoxy-putty-repair-kit-gray","title":"Marine Tex Epoxy Putty Repair Kit - Gray","description":"\u003cp\u003eMarine Tex Epoxy Putty Repair Kit - Gray Marine-Tex, the leading high-strength repair compound is designed to fill, bond and rebuild wood, fiberglass, ceramic, glass, metal, masonry and many plastics. Marine-Tex is manufactured to withstand the harsh demands of both marine and industrial environments, as well as to provide many repair solutions for home, auto and hobby applications. Marine-Tex handles like putty, dries to a rock-like hardness, yet sands as easily as wood. Marine-Tex is a creamy\u003c\/p\u003e","brand":"ITW Marine Tex","offers":[{"title":"2 oz","offer_id":49815297425710,"sku":"ITW-RM301K","price":27.39,"currency_code":"USD","in_stock":true},{"title":"14 oz","offer_id":49815297458478,"sku":"ITW-RM302K","price":75.89,"currency_code":"USD","in_stock":false},{"title":"Quart","offer_id":49815297491246,"sku":"ITW-RM303K","price":139.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/itw-3001_lg__32931.1558143590.jpg?v=1739846877"},{"product_id":"marine-tex-epoxy-putty-repair-kit-white","title":"Marine Tex Epoxy Putty Repair Kit White","description":"\u003cp\u003eMarine Tex Epoxy Putty Repair Kit - White Marine-Tex is a heavy-duty structural epoxy, used to repair aluminum, fiberglass and wooden boats, reinstall loose or stripped fasteners, permanently bond dissimilar metals without galvanic corrosion, and fill gouges in wood, metal and fiberglass, making repaired areas stronger than before. White Marine-Tex is recommended for use on fiberglass or surfaces where a white color is important. Marine-Tex is manufactured to the highest standards to meet the ha\u003c\/p\u003e","brand":"ITW Marine Tex","offers":[{"title":"2 oz","offer_id":49815298441518,"sku":"ITW-RM305K","price":27.39,"currency_code":"USD","in_stock":true},{"title":"14 oz","offer_id":49815298474286,"sku":"ITW-RM306K","price":75.89,"currency_code":"USD","in_stock":true},{"title":"Quart","offer_id":49815298507054,"sku":"ITW-RM307K","price":139.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/marine-tex__32604.1732078779.jpg?v=1739846870"},{"product_id":"west-system-410-microlight","title":"West System 410 Microlight","description":"\u003cp\u003e410 Microlight is West System's fairing filler: a microballoon blend that turns 105 epoxy into a dark red-brown fairing compound that sands easier than anything else in the line. For skimming and shaping large areas above the waterline, it is the West filler to reach for.\u003c\/p\u003e\n\u003c!--bs-body-v1--\u003e\n\u003cp\u003eThicken mixed resin to a peanut-butter consistency, trowel it on, and knock it down with 80 grit once cured; the low-density microballoons are what make the sanding easy. Keep it off high-temp dark surfaces and out of below-waterline barrier-coat jobs; West's own guidance routes those to 407 or straight epoxy.\u003c\/p\u003e\n\u003cp\u003eBlending your own fairing mix costs a fraction per quart: \u003ca href=\"\/products\/phenolic-microballoons\"\u003ephenolic microballoons\u003c\/a\u003e, \u003ca href=\"\/products\/3m-glass-bubbles\"\u003e3M glass bubbles\u003c\/a\u003e, or \u003ca href=\"\/products\/q-cells\"\u003eQ-cells\u003c\/a\u003e in your resin of choice, proportioned with the \u003ca href=\"\/pages\/fairing-filler-calculator\"\u003efairing filler calculator\u003c\/a\u003e. The comparison below shows all four options.\u003c\/p\u003e","brand":"West System","offers":[{"title":"2 oz","offer_id":49815298867502,"sku":"SWES-410-2","price":34.7,"currency_code":"USD","in_stock":true},{"title":"5 oz","offer_id":52408630182190,"sku":"SWES-410-7","price":58.88,"currency_code":"USD","in_stock":true},{"title":"4 lb Bag","offer_id":52408630247726,"sku":"SWES-410-B","price":429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/SWES-410.1__46735.1722500103.jpg?v=1739846868"},{"product_id":"1-4-chopped-strand","title":"1\/4\" Chopped Strand Fiberglass","description":"\u003cp\u003eLoose 1\/4 inch E-glass fiber that adds real tensile and impact strength to epoxy or polyester bonds, castings and putties. Reinforces where fumed silica only thickens.\u003c\/p\u003e","brand":"Boat Suppliers","offers":[{"title":"1 LB Tub","offer_id":50550708371758,"sku":"SM-CH141","price":13.95,"currency_code":"USD","in_stock":true},{"title":"2 LB Tub","offer_id":50550708404526,"sku":"SM-CH142","price":18.95,"currency_code":"USD","in_stock":true},{"title":"4 LB Tub","offer_id":50550708437294,"sku":"SM-CH144","price":29.95,"currency_code":"USD","in_stock":true},{"title":"10 LB Bag","offer_id":50550708470062,"sku":"SM-CH145","price":49.95,"currency_code":"USD","in_stock":true},{"title":"50 LB Box","offer_id":50550708502830,"sku":"SM-CH146","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/1_4_ChoppedStrandFiberglass-Quart.jpg?v=1776948936"},{"product_id":"1-2-chopped-strand","title":"1\/2\" Chopped Strand Fiberglass","description":"\u003cp\u003eLoose 1\/2 inch E-glass fiber for heavier-duty structural reinforcement than 1\/4 inch. Longer strands build tougher, higher-strength bonds and castings.\u003c\/p\u003e","brand":"Boat Suppliers","offers":[{"title":"1 LB Tub","offer_id":50557362372910,"sku":"SM-CH121","price":13.95,"currency_code":"USD","in_stock":true},{"title":"2 LB Tub","offer_id":50557362405678,"sku":"SM-CH122","price":19.95,"currency_code":"USD","in_stock":true},{"title":"4 LB Tub","offer_id":50557362438446,"sku":"SM-CH124","price":29.95,"currency_code":"USD","in_stock":true},{"title":"10 LB Bag","offer_id":50557362471214,"sku":"SM-CH125","price":49.95,"currency_code":"USD","in_stock":true},{"title":"40 LB Box","offer_id":50557362503982,"sku":"SM-CH126","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/1_2_ChoppedStandFiberglass-Quart.jpg?v=1776948757"},{"product_id":"3m-glass-bubbles","title":"3M Glass Bubbles","description":"\u003cp\u003e3M Glass Bubbles are premium hollow glass microspheres for a lightweight fairing compound that sands clean and resists moisture. The step up from commodity Q-cells.\u003c\/p\u003e\n\u003c!--bs-body-v1--\u003e\n\u003cp\u003e3M glass bubbles are the lightest, easiest-sanding filler we stock: hollow spheres that turn epoxy or polyester into a low-density fairing compound that knocks back with light sanding. Best above the waterline, not for structural bonds. See how they compare in \u003ca href=\"\/blogs\/composites\/microballoon-vs-cabosil-fillers-which-one-for-your-project\"\u003emicroballoon vs Cabosil fillers\u003c\/a\u003e.\u003c\/p\u003e","brand":"3M","offers":[{"title":"1 Quart","offer_id":50557440426286,"sku":"FL-3M010","price":7.95,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":50557440491822,"sku":"FL-3M100","price":19.95,"currency_code":"USD","in_stock":true},{"title":"4 Gallon","offer_id":50557440524590,"sku":"FL-3M400","price":59.95,"currency_code":"USD","in_stock":true},{"title":"40 LB Box","offer_id":50557440557358,"sku":"FL-3M-40-B","price":644.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/3M_Glass_Bubbles_-_Quart.jpg?v=1776945401"},{"product_id":"aerosil-cabosil-fumed-silica","title":"Aerosil - Cabosil (Fumed Silica)","description":"\u003cp\u003eFumed silica (Cabosil \/ Aerosil) thickens epoxy, polyester or vinylester into a non-sag paste for structural bonds and fillets. Add it to mixed resin until you reach the consistency you need.\u003c\/p\u003e\n\u003c!--bs-body-v1--\u003e\n\u003cp\u003eFumed silica is the thixotrope that makes epoxy and polyester hang on vertical surfaces and build into non-sag bond paste and fillets. A little goes a long way and it adds thickness without much weight. For when to reach for fumed silica versus a fairing filler, read \u003ca href=\"\/blogs\/composites\/microballoon-vs-cabosil-fillers-which-one-for-your-project\"\u003emicroballoon vs Cabosil\u003c\/a\u003e.\u003c\/p\u003e","brand":"Boat Suppliers","offers":[{"title":"8oz","offer_id":52355153396014,"sku":"FL-AER008","price":6.95,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":50557441081646,"sku":"FL-AER010","price":9.95,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":50557441147182,"sku":"FL-AER100","price":19.95,"currency_code":"USD","in_stock":true},{"title":"4 Gallon","offer_id":50557441179950,"sku":"FL-AER400","price":49.95,"currency_code":"USD","in_stock":true},{"title":"10LB Bag","offer_id":50557441212718,"sku":"FL-AERBG","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/BoatSuppliersFumedSilica-1Quart_c7059e66-6471-403b-af8c-6e68ffa033af.jpg?v=1784318289"},{"product_id":"cotton-flock","title":"Cotton Flock","description":"\u003cp\u003eFine cotton fiber that makes one of the toughest gap-filling fillers for epoxy or polyester. Grips into a joint and resists cracking under load.\u003c\/p\u003e","brand":"Boat Suppliers","offers":[{"title":"1 Quart","offer_id":50557784424750,"sku":"FL-FX010","price":6.95,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":50557784490286,"sku":"FL-FX050","price":17.95,"currency_code":"USD","in_stock":true},{"title":"4 Gallon","offer_id":50557784523054,"sku":"FL-FX400","price":34.95,"currency_code":"USD","in_stock":true},{"title":"50 LB Bag","offer_id":50557784555822,"sku":"FL-FX35B","price":249.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/CottonFlock-Quart.jpg?v=1776948652"},{"product_id":"alumina-trihydrate-ath","title":"Alumina Trihydrate (ATH)","description":"\u003cp\u003eA fine white mineral filler (ATH) that adds flame and smoke resistance to epoxy, polyester or vinylester castings and laminates.\u003c\/p\u003e","brand":"Boat Suppliers","offers":[{"title":"1 LB Tub","offer_id":50557786226990,"sku":"SM-ATH1","price":5.85,"currency_code":"USD","in_stock":true},{"title":"2 LB Tub","offer_id":50557786259758,"sku":"SM-ATH2","price":9.25,"currency_code":"USD","in_stock":true},{"title":"4 LB Tub","offer_id":50557786292526,"sku":"SM-ATH4","price":14.95,"currency_code":"USD","in_stock":true},{"title":"10 LB Tub","offer_id":50557786325294,"sku":"SM-ATH5","price":27.5,"currency_code":"USD","in_stock":true},{"title":"50 LB Tub","offer_id":50557786358062,"sku":"SM-ATH6","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/AluminaTrihydrate-Quart.jpg?v=1776948713"},{"product_id":"evertex-non-skid-additive","title":"Non-Skid Additive For Gelcoats \u0026 Paints","description":"\u003cp\u003eA tough polymer grit you mix into gelcoat, paint or epoxy for a safe, slip-resistant deck texture. Fine, medium or coarse.\u003c\/p\u003e\n\u003c!--bs-body-v1--\u003e\n\u003cp\u003eStir this fine polymer grit into gelcoat, paint or epoxy to build a non-skid texture on decks, steps and swim platforms. Adjust the dose for anything from a light tooth to an aggressive grip, then topcoat to lock it in. Pairs with our \u003ca href=\"\/collections\/gelcoats\"\u003egelcoats\u003c\/a\u003e for a finished deck.\u003c\/p\u003e","brand":"Boat Suppliers","offers":[{"title":"Coarse \/ 8oz","offer_id":50557802840366,"sku":"EX-2008","price":11.38,"currency_code":"USD","in_stock":true},{"title":"Coarse \/ Pint (16oz)","offer_id":50557802873134,"sku":"EX-2016","price":19.07,"currency_code":"USD","in_stock":true},{"title":"Coarse \/ Quart (32oz)","offer_id":50557802905902,"sku":"EX-2032","price":27.19,"currency_code":"USD","in_stock":true},{"title":"Coarse \/ Gallon","offer_id":50557802938670,"sku":"EX-2100","price":75.4,"currency_code":"USD","in_stock":true},{"title":"Coarse \/ 4-Gallon Pail","offer_id":50557802971438,"sku":"EX-2400","price":219.67,"currency_code":"USD","in_stock":true},{"title":"Medium \/ 8oz","offer_id":50557803004206,"sku":"EX-6008","price":11.38,"currency_code":"USD","in_stock":true},{"title":"Medium \/ Pint (16oz)","offer_id":50557803036974,"sku":"EX-6016","price":19.07,"currency_code":"USD","in_stock":true},{"title":"Medium \/ Quart (32oz)","offer_id":50557803069742,"sku":"EX-6032","price":27.19,"currency_code":"USD","in_stock":true},{"title":"Medium \/ Gallon","offer_id":50557803102510,"sku":"EX-6100","price":75.4,"currency_code":"USD","in_stock":true},{"title":"Medium \/ 4-Gallon Pail","offer_id":50557803135278,"sku":"EX-6400","price":219.67,"currency_code":"USD","in_stock":true},{"title":"Fine \/ 8oz","offer_id":50557803168046,"sku":"EX-9008","price":11.38,"currency_code":"USD","in_stock":true},{"title":"Fine \/ Pint (16oz)","offer_id":50557803200814,"sku":"EX-9016","price":19.07,"currency_code":"USD","in_stock":true},{"title":"Fine \/ Quart (32oz)","offer_id":50557803233582,"sku":"EX-9032","price":27.19,"currency_code":"USD","in_stock":true},{"title":"Fine \/ Gallon","offer_id":50557803266350,"sku":"EX-9100","price":75.4,"currency_code":"USD","in_stock":true},{"title":"Fine \/ 4-Gallon Pail","offer_id":50557803299118,"sku":"EX-9400","price":219.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/EverTexNon-Skid.jpg?v=1765116528"},{"product_id":"q-cells","title":"Q-Cells","description":"\u003cp\u003eQ-cells are hollow glass microspheres that turn epoxy or polyester into a light, easy-sand fairing compound. Best for shaping and smoothing above the waterline, not structural bonds.\u003c\/p\u003e\n\u003c!--bs-body-v1--\u003e\n\u003cp\u003eFor the difference between Q-cells, microballoons, glass bubbles and fumed silica, and when to reach for each, see our \u003ca href=\"\/blogs\/composites\/microballoon-vs-cabosil-fillers-which-one-for-your-project\"\u003efiller comparison\u003c\/a\u003e.\u003c\/p\u003e","brand":"Boat Suppliers","offers":[{"title":"1 Quart","offer_id":50557832495406,"sku":"FL-QC010","price":7.95,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":50557832560942,"sku":"FL-QC100","price":19.95,"currency_code":"USD","in_stock":true},{"title":"4 Gallon","offer_id":50557832593710,"sku":"FL-QC400","price":42.95,"currency_code":"USD","in_stock":true},{"title":"32 LB Bag","offer_id":50557832626478,"sku":"FL-QC32B","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/BoatSuppliersQ-CellFiller-1Quart_1.jpg?v=1784318134"},{"product_id":"sm-fairing-compound","title":"Boat Suppliers Fairing Compound","description":"\u003cp\u003eA pre-blended lightweight fairing filler: just add epoxy, trowel, and sand to a fair, primer-ready surface. No measuring separate powders.\u003c\/p\u003e","brand":"Boat Suppliers","offers":[{"title":"1 Quart","offer_id":50557836099886,"sku":"SM-FC010","price":13.95,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":50557836165422,"sku":"SM-FC050","price":26.95,"currency_code":"USD","in_stock":true},{"title":"4 Gallon","offer_id":50557836198190,"sku":"SM-FC400","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/SMFairingCompound-Quart.jpg?v=1776948852"},{"product_id":"1-32-milled-fiber","title":"1\/32\" Milled Fiber","description":"\u003cp\u003eFine 1\/32 inch milled E-glass for strong adhesive bonds and fillets without much bulk. Mixes smoother than chopped strand and wets out clean.\u003c\/p\u003e","brand":"Boat Suppliers","offers":[{"title":"1 Pint","offer_id":50557839442222,"sku":"SM-MF005","price":8.95,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":50557839474990,"sku":"SM-MF010","price":13.95,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":50557839540526,"sku":"SM-MF050","price":46.2,"currency_code":"USD","in_stock":true},{"title":"50LB Bag","offer_id":50640718135598,"sku":"SM-MF500","price":194.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/MilledFiber-1Quart.jpg?v=1784336933"},{"product_id":"phenolic-microballoons","title":"Phenolic Microballoons","description":"\u003cp\u003ePhenolic microballoons make a low-cost, ultra-light fairing and void-filling putty in epoxy or polyester. Sand very easily; cure reddish-brown, so best under paint.\u003c\/p\u003e\n\u003c!--bs-body-v1--\u003e\n\u003cp\u003ePhenolic microballoons are the classic reddish-brown fairing filler: they bulk out epoxy or polyester into a light, sandable paste for shaping and smoothing on hull and deck. They sand easier than fumed silica and add no structural strength. Compare your options in \u003ca href=\"\/blogs\/composites\/microballoon-vs-cabosil-fillers-which-one-for-your-project\"\u003emicroballoon vs Cabosil fillers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Boat Suppliers","offers":[{"title":"1 Quart","offer_id":50557846356270,"sku":"FL-PH010","price":18.95,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":50557846421806,"sku":"FL-PH050","price":39.5,"currency_code":"USD","in_stock":true},{"title":"4 Gallon","offer_id":50557846454574,"sku":"FL-PH400","price":129.95,"currency_code":"USD","in_stock":true},{"title":"26 LB Box","offer_id":50557846487342,"sku":"FL-PH26B","price":895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/PhenolicMicroballons-Quart.jpg?v=1776948893"},{"product_id":"west-system-403-microfibers","title":"West System 403 Microfibers","description":"\u003cp\u003e403 Microfibers is West System's cotton-fiber bonding filler: stir it into mixed 105 epoxy to build a non-sag structural adhesive for fillets, gap filling, and glue joints where you need strength more than a pretty sanding job.\u003c\/p\u003e\n\u003c!--bs-body-v1--\u003e\n\u003cp\u003eAdd it to mixed resin until you reach mayonnaise-to-peanut-butter consistency depending on gap and vertical hold. The cured mix is off-white, tough, and deliberately not a fairing compound; keep it in the joint, not on the surface you plan to sand. Works in polyester and vinyl ester too, though West markets it for the 105 system.\u003c\/p\u003e\n\u003cp\u003eShop-quantity alternative: our \u003ca href=\"\/products\/1-32-milled-fiber\"\u003e1\/32 in milled fiber\u003c\/a\u003e does the same structural thickening with chopped glass instead of cotton, in any resin, at bulk jar pricing, and \u003ca href=\"\/products\/aerosil-cabosil-fumed-silica\"\u003efumed silica\u003c\/a\u003e handles the anti-sag half of the job. The spec table below compares all three.\u003c\/p\u003e","brand":"West System","offers":[{"title":"403-2 -- 6 oz","offer_id":50918273646894,"sku":"WEST-4039","price":26.03,"currency_code":"USD","in_stock":true},{"title":"403-7 -- 20 oz","offer_id":50918273679662,"sku":"WEST-40328","price":52.22,"currency_code":"USD","in_stock":true},{"title":"403-B -- 20 lb","offer_id":50924321079598,"sku":"WEST-403B","price":338.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/WestSystem403Microfibers.jpg?v=1755310939"},{"product_id":"west-system-407-low-density-filler","title":"West System 407 Low-Density Filler","description":"\u003cp\u003eWest System's 407 Low-Density Filler is the fairing filler of the West range: a microballoon blend that mixes into 105 epoxy to make an easy-sanding, low-density fairing putty. It cures to a dark red-brown, shapes cleanly with a fairing board, and holds enough strength for faired surfaces above or below the waterline once sealed.\u003c\/p\u003e\n\u003c!--bs-body-v1--\u003e\n\u003ch3\u003e407 or 410?\u003c\/h3\u003e\n\u003cp\u003eBoth sand easily. \u003ca href=\"\/products\/west-system-410-microlight\"\u003e410 Microlight\u003c\/a\u003e is lighter and the easiest sanding of the two, but West limits it to areas out of the water and away from high load. 407 gives up a little sanding speed for real strength, which makes it the pick for hull-side fairing, below-waterline work, and anywhere the faired surface takes abuse.\u003c\/p\u003e\n\u003ch3\u003eMixing it\u003c\/h3\u003e\n\u003cp\u003eWet out the surface with mixed epoxy first, then thicken the batch with 407 to a peanut-butter consistency for fairing or a bit looser for skim coats. Spread, let it cure, and knock it down with 80 grit before finishing. Our \u003ca href=\"\/pages\/fairing-filler-calculator\"\u003efairing filler calculator\u003c\/a\u003e sizes the batch for you.\u003c\/p\u003e\n\u003ch3\u003eThe house-brand route\u003c\/h3\u003e\n\u003cp\u003eOur \u003ca href=\"\/products\/phenolic-microballoons\"\u003ePhenolic Microballoons\u003c\/a\u003e are the same class of filler at a fraction of the price per quart, and our pre-blended \u003ca href=\"\/products\/sm-fairing-compound\"\u003eFairing Compound\u003c\/a\u003e adds the anti-sag silica for you. The Compare section below puts them side by side.\u003c\/p\u003e","brand":"West System","offers":[{"title":"4 oz","offer_id":52408632836398,"sku":"SWES-407-5","price":40.1,"currency_code":"USD","in_stock":true},{"title":"12 oz","offer_id":52408632869166,"sku":"SWES-407-15","price":85.5,"currency_code":"USD","in_stock":true},{"title":"14 lb Bag","offer_id":52408632901934,"sku":"SWES-407-B","price":839.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/west-system-407-low-density-fairing-filler.png?v=1786218761"},{"product_id":"lf-310-32","title":"Layform Fairing Filler Blend, Above Waterline, Fair LF-310, 1 Quart","description":"\u003cp\u003eLightweight epoxy and polyester compatible fairing blend. Sands easily, feathers to a clean edge and does not load the paper. BLEND NO. LF-310.\u003c\/p\u003e","brand":"Layform","offers":[{"title":"Default Title","offer_id":52488970699054,"sku":"LF-310-32","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/fair-quart.png?v=1787421949"},{"product_id":"lf-320-32","title":"Layform Fairing Filler Blend, Below Waterline, Hydro LF-320, 1 Quart","description":"\u003cp\u003eAll glass below waterline fairing blend. No phenolic, so there is no water uptake path through the filler itself. The bottom paint prep filler. BLEND NO. LF-320.\u003c\/p\u003e","brand":"Layform","offers":[{"title":"Default Title","offer_id":52488970731822,"sku":"LF-320-32","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/320-hydro-jar.png?v=1787421951"},{"product_id":"lf-330-32","title":"Layform Skim Coat Filler Blend, Skim LF-330, 1 Quart","description":"\u003cp\u003eFine glass skim blend for the last pass before primer. Fills weave and pinholes without building thickness. BLEND NO. LF-330.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePreview listing. Pricing is illustrative and the cost basis is not yet set.\u003c\/em\u003e\u003c\/p\u003e","brand":"Layform","offers":[{"title":"Default Title","offer_id":52488970764590,"sku":"LF-330-32","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/330-skim-jar.png?v=1787421954"},{"product_id":"lf-110-16","title":"Layform Structural Adhesive Blend, Bond LF-110, 16 oz","description":"\u003cp\u003eSilica, milled fiber and cotton flock blend for structural bonding. Mixes to a non-sagging paste that holds a bond line without starving it. BLEND NO. LF-110.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePreview listing. Pricing is illustrative and the cost basis is not yet set.\u003c\/em\u003e\u003c\/p\u003e","brand":"Layform","offers":[{"title":"Default Title","offer_id":52488970797358,"sku":"LF-110-16","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/110-bond-jar.png?v=1787421956"},{"product_id":"lf-210-16","title":"Layform Structural Cove Blend, Fillet LF-210, 16 oz","description":"\u003cp\u003ePhenolic, flock and silica cove blend. Tools to a clean radius and stays where it is put on a vertical fillet. BLEND NO. LF-210.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePreview listing. Pricing is illustrative and the cost basis is not yet set.\u003c\/em\u003e\u003c\/p\u003e","brand":"Layform","offers":[{"title":"Default Title","offer_id":52488970830126,"sku":"LF-210-16","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/210-fillet-jar.png?v=1787421959"},{"product_id":"lf-430-16","title":"Layform Structural Filler Blend, Build LF-430, 16 oz","description":"\u003cp\u003eHigh build filler blend for gap filling and core replacement where thickness has to happen in one pass. BLEND NO. LF-430.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePreview listing. Pricing is illustrative and the cost basis is not yet set.\u003c\/em\u003e\u003c\/p\u003e","brand":"Layform","offers":[{"title":"Default Title","offer_id":52488970862894,"sku":"LF-430-16","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/410-build-jar.png?v=1787421962"},{"product_id":"lf-grip-16","title":"Layform Non-Skid Coating Additive, Grip, 16 oz","description":"\u003cp\u003eGraded polymer non-skid additive for deck paint and gelcoat. Stays in suspension through the pot life and gives a repeatable texture at a published add rate.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePreview listing. Pricing is illustrative and the cost basis is not yet set.\u003c\/em\u003e\u003c\/p\u003e","brand":"Layform","offers":[{"title":"Default Title","offer_id":52488970895662,"sku":"LF-GRIP-16","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/4071\/2494\/files\/grip-jar16.png?v=1787421964"}],"url":"https:\/\/boatsuppliers.com\/collections\/fillers-fairing-putty.oembed?page=2","provider":"Boat Suppliers","version":"1.0","type":"link"}